Industrial Equipments

Math Lab
Industrial Equipments

Showing 1–10 of 38 results

    ADSORPTION IN PACKED BED
    Product Code - KS000534

    Utilities Required:Water Supply & DrainElectricity Supply: I Phase, 220VAC, 1.5kWInstruments, Laboratory ....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    ADSORPTION IN PACKED BED

    Utilities Required:Water Supply & DrainElectricity Supply: I Phase, 220VAC, 1.5kWInstruments, Laboratory Glassware and Chemicals required for analysis as per the system adoptedSpecifications:Product Adsorption SetupReactor ColumnMaterial Borosil Glass, different diameter with different height of packing (3 Nos.) Feed Tank Material Stainless Steel, Capacity 20 Ltrs., feed lines, drain valve etc. (1Nos.) Receiving Tank Material Stainless Steel, Capacity 20 Ltrs (1Nos.) Feed Circulation By pump, Magnetic drive made of Polypropylene (1Nos.) Flow Measurement Rota-meter 1 Nos. (for feed) Feed Piping PVC / SS sizeStop Watch Electronic Control Panel On off switch, Mains Indicator etc. The setup is painted with good quality paints & mounted on a strong support.

    AUTOMATIC MOUNTING PRESS FOR METALLURGY LAB
    Product Code - KS0001676

    King Kraft provide Automatic Mounting Press for metallographic specimen. It is suitable for all Thermoset....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    AUTOMATIC MOUNTING PRESS FOR METALLURGY LAB

    King Kraft provide Automatic Mounting Press for metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It has automatically cut-off in heating temperature, the holding time and acting force. The operator can change 4 specification patterns according to the difficult specimens. It can make 2 specimens at one time. Specification Design specimen : 25mm, 30mm, 40mm, 50mm Power: 220V 50Hz Maximum consumption: 1800W Pressure: 0~2Mpa Temperature:0~300 deg. C Farm time: 0~99minutes and 99 seconds Outer Body measurement: 615 x 510x 500mm Weight: 100Kg–130 Kg Cooling Source: Water cooling<

    BELT POLISHER FOR METALLURGY LAB
    Product Code - KS0001703

    King Kraft is well-renowned manufacturer, exporter and supplier of a wide range of the best quality Belt ....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    BELT POLISHER FOR METALLURGY LAB

    King Kraft is well-renowned manufacturer, exporter and supplier of a wide range of the best quality Belt Polisher that is designed for initial rough grinding. In order to manufacture this polisher as per the prevalent industry norms, our seasoned professionals use superior quality raw material and cutting-edge technology at our sophisticated manufacturing unit. This polisher is widely used in pharmaceutical, chemical and various other industries. Available in various specifications, we offer this Belt Polisher as per the specific needs of clients. Features: – Strong construction – Optimum performance – Easy to use – Corrosion resistance Specification Working on :- 220V in single phase Operation :- Manual Belt :- 100/915mm Endless Belt Pulleys System :- Balanced aluminum pulleys Polishing Motor power :- ½ H.P Single / Single Phase

    BRINELL HARDNESS TESTER FOR METALLURGY LAB
    Product Code - KS0001816

    Brinell Hardness Tester dominates the 10 grades check force it can scrutinize unto 10 Brinell scales also....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    BRINELL HARDNESS TESTER FOR METALLURGY LAB

    Brinell Hardness Tester dominates the 10 grades check force it can scrutinize unto 10 Brinell scales also it has an extensive test range.The outer shell of machine is formed of distinctive formation one-time casted technique, balanced assembly and it is not pleasant to be out of shape.

    • -Sensor is attached with microcomputer control system, with high exact test and stable function.
    • – It is collaborated with minimal noise any experiment is possible.
    • -The software is easily transferable, efficiency is also upgraded.

    -Concavity diameter could be displayed on LCD, hardness value, test force, test indenter, conversion hardness value, and dynamic test force, dwell time, saved hardness value, and test times etc.  As per the people’s visual requirement the light brightness is adjustable to avoid stress in log time operating. •It is easy to get printed data as printer is integral. • This machine can meet customer’s requirement most efficiently as the software through we can measure images which is effectively improved can be connected machine and computer. Application to test big size metal grain it consists the large indentation with super test speed, it is used for cast iron raw metal also for pure aluminium lead and tin. Technical Constraints Model HV / BHT Conversion scale HRA¼HRB¼HRC¼HRD¼ HK¼HBS¼H15N¼H30N¼H45N¼H15T¼H30T¼H45T Operation Language English Indentation values Direct digital display Hardness value read Big Digital LCD Screen Minimum test unit 0.00125mm Objective lens and indenter shifting Auto turret Light source LED cold light source(continuous using 24 hours, life-span can up to 100 thousand hours Data output Built-in printer(Max, Min value, test time, test times¼ mean value¼‰ RS-232 port Brinell scale HBW2.5/62.5HBW2.5/187.5HBW5/125HBW5/750 HBW10/100 HBW10/250 HBW10/500HBW10/1000HBW10/1500HBW10/3000 Test Force 62.5kgf(612.9N)100kgf (980.7N)125kgf (1226N)187.5kgf (1839N)250kgf (2452N)500kgf (4903N)750kgf (7355N)1000kgf (8907N)1500kgf (14710N)3000kgf (29420N) Amplification times 100X Specimen maximum height allowed 230mm Instrument size 550—210—750mm ¼L—W—H¼‰ Instrument weight 120kg Loading method Automatic (load, dwell, unload¼‰ Dwell time 5½60S Power supply AC220V + 5%, 50~60 Hz Standard accessories 20X measuring eyepiece lens 1 piece, 2.5X objective lens 1 piece, 5X objective lens 1 piece¼2.5510mm harden alloy indenter 1 piece, standard hardness block 2 pieces, big, medium and V test table each 1 piece, power cable 1 piece, accessory case 1 set, dust-proof cover 1 piece, manual instruction, hardness conversion table, certificate of quality and warranty card each 1 piece

    CAM ANALYSIS APPARATUS
    Product Code - KS0001855

    UTILITIES REQUIRED:Electricity 0.5 kW, 220 V, Single PhaseStroboscope (Optional).TECHNICAL DETAILS:Cam Sh....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    CAM ANALYSIS APPARATUS

    UTILITIES REQUIRED:Electricity 0.5 kW, 220 V, Single PhaseStroboscope (Optional).TECHNICAL DETAILS:Cam Shaft Material Stainless SteelCams Tangent, Eccentric, Circular Arc type.Followers Roller, Knife edge, MushroomCompression SpringProvided Weights 1 kg., 500gm, 200 gm & 100gmMotor Variable speed, ½ HP., 0-1500 RPM with speed controllerDial Gauge Baker & Mercer/Standard Make

    DIGITAL POLISHING MACHINE(TABLE TOP) FOR METALLURGICAL LAB
    Product Code - KS0002163

    King Kraft is well known for quality machine manufacturing also this machine is well designed with superb....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    DIGITAL POLISHING MACHINE(TABLE TOP) FOR METALLURGICAL LAB

    King Kraft is well known for quality machine manufacturing also this machine is well designed with superb raw material and most intelligent professional guided for advanced technology, under microscope observation this machine is suitable for polishing the specimen it also fulfill the requirement and specification by our valuable clients. Features: – Dint performance – no more worries for maintenance. – Corrosion free – Powerful construction

    DOUBLE DISC POLISHING MACHINE(FLOOR MODEL) FOR METALLURGY LAB
    Product Code - KS0002201

    Polishing Machine provided by King Kraft is suitable for the polishing of the specimen which has been gri....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    DOUBLE DISC POLISHING MACHINE(FLOOR MODEL) FOR METALLURGY LAB

    Polishing Machine provided by King Kraft is suitable for the polishing of the specimen which has been grinded. The specimen surface is very smooth after processing and can be used to observe and measure the metallography structure of specimen under microscope. Double Disc Polishing – 8″ Disc Table top design with continuously variable speed. Fully moulded FRP body with easy disc change design. Quick change disc design enables discs with different emery grits/polish cloths to be used in desired steps. Specification – 1/2HP high torque DC motor – 8″ disc diameter Standard – 10″ disc diameter option – Many discs can be used – Thyristor controlled speed controller – Digital speed indicator – 50 to 1200 rpm – Value – Versatility – Performance

    FLUIDIZED BED DRYER
    Product Code - KS0002364

    Utilities Required:Water Supply & DrainElectricity Supply: I Phase, 220VAC, 1.5kWInstruments, Laborat....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    FLUIDIZED BED DRYER

    Utilities Required:Water Supply & DrainElectricity Supply: I Phase, 220VAC, 1.5kWInstruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted Specifications: ProductAdsorption SetupReactor ColumnMaterial Borosil Glass, different diameter with different height of packing (3 Nos.)Feed TankMaterial Stainless Steel, Capacity 20 Ltrs., feed lines, drain valve etc. (1Nos.)Receiving TankMaterial Stainless Steel, Capacity 20 Ltrs (1Nos.)Feed CirculationBy pump, Magnetic drive made of Polypropylene (1Nos.)Flow MeasurementRota-meter 1 Nos. (for feed)Feed PipingPVC / SS sizeStop WatchElectronicControl PanelOn off switch, Mains Indicator etc.The setup is painted with good quality paints & mounted on a strong support.

    FORCED DRAFT TRAY DRYER
    Product Code - KS0002376

    FeaturesSuperb Painted structureSimple to operate & maintainCompact & stand alone set upUtilities Require....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    FORCED DRAFT TRAY DRYER

    FeaturesSuperb Painted structureSimple to operate & maintainCompact & stand alone set upUtilities RequiredElectric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. 5A, three pin socket with switch for weighing scale, 15A, three pin socket with switch for heaterMaterial Saw dust @ 1Kg.Anemometer Air flow measurement

    HAND POLISHER FOR METALLURGICAL LAB
    Product Code - KS0002508

    We are an unparalleled name, engaged in offering a premium quality range of Hand Polisher. It is availabl....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    HAND POLISHER FOR METALLURGICAL LAB

    We are an unparalleled name, engaged in offering a premium quality range of Hand Polisher. It is available with 4 surface plates which is precisely used to control the consumption of consumable and facilitates grits polishing. This polisher comes with water dripping arrangement which help in the metallographic practices. Offered hand held product is precisely manufactured under the stern supervision of our diligent professionals using the best-in-class raw material and sophisticated technology. Extensively demanded in the industry for its excellent performance, we offer this Hand Polisher at industry leading rates to the clients. Features: – Sturdy construction – High performance – Precisely engineered – Less maintenance