Engineering Equipments

Math Lab
Engineering Equipments

Showing 1–10 of 23 results

    BERNOULLIS APPARATUS
    Product Code - KS0001714

    Our organization is counted among the listed manufacturers, wholesalers and exporters of premium quality ....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    BERNOULLIS APPARATUS

    Our organization is counted among the listed manufacturers, wholesalers and exporters of premium quality Bernoulli’s apparatus. Offered apparatus is precisely manufactured under strict supervision in compliance with industry laid parameters. These units consist of a rectangular transparent flow section through which water is to be flown. The velocity of water changes across the sectional area of channel changes.

    Experiments:

    To verify Bernoulli’s Theorem experimentally

    Utilities Required:

    Electric supply 0.5 kW, 220V AC, Single PhaseWater supply Tap water connection ” BSP Distilled water @ 60 liters (optional)Floor Area with Drain facility

    Technical Specifications:

    Electric supply: 0.5 kW, 220V AC, Single PhaseInlet Tank Capacity: 20 Ltrs. MOC SSSupply Tank Capacity: 85 Ltrs. MOC SSMeasuring Tank Capacity: 40 Ltrs. MOC SS fitted with Piezometer Tube & scalePiezometer Tubes: Material P.U. Tubes (9 Nos.)

    CAVITATION APPARATUS
    Product Code - KS0001865

    The apparatus has been designed to demonstrate the phenomena of cavitation. The present set-up consists o....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    CAVITATION APPARATUS

    The apparatus has been designed to demonstrate the phenomena of cavitation. The present set-up consists of a test section made of acrylic having conversion and diversion section. Pressure tapings at appropriate position are provided. This test section is having one control valve at upstream side to regulate the water flow rate. Two pressure gauges are connected to these taping which give the pressure readout at the time of flow passing through this test section.The unit is self-contained close circuit type with sump tank, measuring tank and centrifugal pump. Flow through test section can be regulated with the help provided by-pass and control valve.

    Experimentation:

    To observe the phenomena of cavitation.To compare the theoretical and actual pressures at cavitation condition.

    Utilities required :

    Water supply : initial fill.Floor drain required.Floor area required : 1. 5 m x 1 m.

    Technical details :

    Test section : material acrylicPressure gauge : 0-4 kg/cm2Vacuum gauge : 0-760 mmhgWater circulation : by pump crompton make.Flow measurement : measuring tank (capacity : 40 liters) &Electronic stop watchSump tank : capacity : 60 litersControl panel comprises of : standard make on/off switch, mains indicator, etc.Instruction manual : an english instruction manual will beProvided along with the apparatusTanks will be made of stainless steel.The whole set-up is well designed and arranged in a good quality painted structure

    DISCHARGE OVER NOTCHES
    Product Code - KS0002173

    The setup consists of a channel having sufficient length and width in which water is supplied from the bo....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    DISCHARGE OVER NOTCHES

    The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 60 V notch & 45 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve andby-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

    EXPERIMENTATION:

    To determine co-efficient of discharge (Cd) through:Ø V notch 45°Ø V notch 60°Ø Rectangular Notch.UTILITIES REQUIRED :Ø Water Supply.Ø Drain.Ø Electricity 0.5 kW, 220V AC, Single Phase.Ø Floor Area 1.5 x 0.75 ml

    TECHNICAL DETAILS :

    Channel Test Section : Size 600 x 250 x 180 mm.Ø Notches : Material BrassRectangular Notch45° V Notch60° V NotchØ Pointer Gauge : With Vernier scale.Ø Water Circulation : FHP Pump Crompton make.Ø Flow Measurement : Using Measuring Tank with Piezometer, Capacity 25 Ltrs.Ø Sump Tank : Capacity 50 Ltrs.Ø Stop Watch : Electronic.

    DISCHARGE THROUGH VENTURIMETER AND ORIFICEMETER
    Product Code - KS0002174

    Our company offers superior quality Discharge through venturimeter & orificemeter at the most afforda....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    DISCHARGE THROUGH VENTURIMETER AND ORIFICEMETER

    Our company offers superior quality Discharge through venturimeter & orificemeter at the most affordable market price. This apparatus is used to determine the co-efficient of discharged through different flow meters like the venturimeter. Offered apparatus is hugely appreciated among the clients for hassle-free installation, simple operation and optimum performance. Furthermore, our offered apparatus is also demanded for its dimensional accuracy.

    Description:

    The apparatus consists of two pipelines emerging out from a common manifold. One pipe line contain a Venturimeter and other contains an Orifice. The pressure tapings from the Venturimeter and orifice meter are taken to differential manometer to measure pressure difference. The Venturimeter and Orificemeter are connected in parallel and any one of them can be put in operation by operating valves provided at the downstream. The flow can also be regulated by these valves. The set-up can be connected to Hydraulic Bench with flexible pipe line.

    Experiments:

    To determine the co-efficient of discharged through VenturimeterTo measure discharge through Venturimeter as flow meters

    Utilities Required:

    Electric supply 0.5 kW, 220V AC, Single PhaseWater supply Tap water connection ” BSP Distilled water @ 60 liters (optional)Floor Area with Drain facility

    Technical Specifications:

    Venturimeter Material: Clear Acrylic compatible to 1” Dia. PipeOrificemeter Material: Clear Acrylic compatible to 1” Dia. PipeWater Circulation: FHP Pump, Crompton makeFlow Measurement: Using Measuring Tank with Piezometer(Capacity 25 Ltrs.) and Electronic Stop WatchSump Tank Capacity: 50 LtrsControl Panel Comprises of: Standard make On/Off Switch, Mains Indicator,etcInstruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus

    DROPWISE CONDENSATION APPARATUS
    Product Code - KS0002202

    Condensation is a phase change heat transfer process occurring in many industrial applications, such as i....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    DROPWISE CONDENSATION APPARATUS

    Condensation is a phase change heat transfer process occurring in many industrial applications, such as in steam power plants, refrigeration plants etc. Thus this is one of the important heat transfer process present in mechanical and chemical engineering application. The condensation of Vapour on a surface is of two types: 1. Drop wise Condensation. 2. Film wise Condensation. This set up is designed for finding heat transfer co-efficient of two types of condensation and for visualization of these processes. It consists of a vertical frame. Condensation tubes are fitted inside compact glass cylinder. Steam generator is fitted at the backside of the cylinder. Steam comes directly from generator to cylinder. Two valves are fitted to control flow rate of water in individual tubes. Digital Temperature Indicator monitors temperatures. Pressure gauge and Rotameter can observe steam pressure and cold, water flow rates respectively. A Digital temperature Controller is provided for controlling the temperature of Steam. Water level indicator is provided to safeguard the heater. Condensate is measured by measuring cylinder.ExperimentsTo study the Film wise & Drop wise condensation of steam on a vertical surfaceVisualization of condensation process in drop wise as well as film wiseUtilities RequiredWater supply 5 lit/min (approx.)Electricity Supply: 1Phase. 220 V AC. 1.5 kWTable for set-up support

    EMISSIVITY MEASUREMENT APPARATUS
    Product Code - KS0002232

    The present Set-up is designed to measure the emissivity of test plate. The test plate comprises of a mic....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    EMISSIVITY MEASUREMENT APPARATUS

    The present Set-up is designed to measure the emissivity of test plate. The test plate comprises of a mica heater sandwiched between two circular plates. Black plate is identical with test plate, but its surface is blackened. As all the physical properties, dimension and temperature are equal; heat losses from both plates will be same except radiation loss. Hence the input difference will be due to difference in emissivity. Both plates are supported on individual brackets in a wooden enclosure with one side glass to ensure steady atmospheric conditions. Temperature Sensors are provided to measure the temperature of each plate and surrounding. Supply is given to heaters through separate variacs so that temperatures of both can be kept equal and is measured with Digital Voltmeter and Digital Ammeter.ExperimentsDetermining the Emissivity of a test plate.Study the variation of emissivity of test plate with respect to absolute temperature.Utilities RequiredElectricity Supply: 1Phase, 220 VAC, 4 Amp. Table for set-up support

    FORCED VORTEX APPARATUS
    Product Code - KS0002377

    Very easy to operate, install and maintain, the offered Forced Vortex Apparatus is highly user friendly i....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    FORCED VORTEX APPARATUS

    Very easy to operate, install and maintain, the offered Forced Vortex Apparatus is highly user friendly in nature. Widely used for the purpose of providing a smooth rotational flow of liquid, the offered product is asked for in the market. Manufactured by us in compliance with the set industrial norms and guidelines and is provided to clients at a market leading rate, the offered product is one of the best that is available.

    Specification:

    Power supply: Single Phase, 220 volts, 50 Hz, 5 Amp with earthWater SupplyDrain

    HEAT PIPE DEMONSTRATOR
    Product Code - KS0002578

    It is a super-conducting device and involves the transfer of heat by boiling and condensation of a fluid ....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    HEAT PIPE DEMONSTRATOR

    It is a super-conducting device and involves the transfer of heat by boiling and condensation of a fluid and hence transfer of heat takes place under nearly isothermal condition. In this apparatus the comparison of heat pipe with the copper pipe as good conductor of heat and with the stainless steel pipe as same material of construction is made. It consists of three identical cylindrical conductors In respect of geometry. One end of these is heated electrically while there are small capacity tanks acting as heat sinks at the other end. The unit consists of a heat pipe a copper pipe and a stainless steel pipe. Temperature sensors are embedded along the length to measure the temperature distribution and the heat transfer rate is noted in terms of the temperature rise in the heat sink tanks.The performance of the heat pipe as a super-conducting device can be studied well in terms of the temperature distribution along the length at a given instant and can be compared with other two members. Nearly isothermal temperature distribution and fast rise of temperature in heat sink tank reveals the heat pipe superiority over the conventional conductorsExperimentsTo demonstrate the super thermal conductivity of Heat Pipe and to compare its working with best conductor i.e. Copper pipe & Stainless steel pipe as same material of construction.To plot the temperature v/s time response of three pipesTo plot the temperature distribution along the length of three pipesUtilities RequiredElectricity Supply: 1Phase, 220 V AC, 2 Amp.    Table for set-up support

    HEAT TRANSFER FROM A PIN FIN
    Product Code - KS0002580

    The setup is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in duct....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    HEAT TRANSFER FROM A PIN FIN

    The setup is designed to study the heat transfer in a pin fin. It consists of pin type fin fitted in duct. A fan is provided on one side of duct to conduct experiments under forced draft conditions. Airflow rates can be varied with the help of damper provided in the duct. A heater heats one end of fin and heat flows to another end. Heat input to the heater is given through Variac. Digital Temperature Indicator measures temperature distribution along the fin.ExperimentsTo study temperature distribution along the length of fin in both Free & forced convectionComparison of theoretical temperature distribution with experimentally obtained distributionUtilities RequiredElectricity Supply: 1 Phase, 220 V AC, 5 Amp.    Table for set-up support

    HEAT TRANSFER IN AGITATED VESSEL
    Product Code - KS0001035

    In most industrial processes including reactors, heat is to be added or extracted to control the process.....

    Add To Enquiry Download Catalogue View Detail

    Description & Specification

    HEAT TRANSFER IN AGITATED VESSEL

    In most industrial processes including reactors, heat is to be added or extracted to control the process. The addition and removal of heat is done by passing steam in jacket fitted to the outside of the vessel or passing cold. Water in helical coil inside the vessel. For effective heat transfer and even distribution of heat, the liquid inside is continuously agitated. The present set-up offers us. A comparative study of Jacket & Helical coil, which can be operated simultaneously. It is a stainless steel jacketed vessel inside which, a helical coil of copper is fitted. A variable speed stirrer is fitted in vessel. The system is such designed that either steam or water is allowed to enter inside anyone of the jacket and helical coil by an arrangement of control valves. Variation in temperature of inside water is measured and is noted. Set-up is fitted with steam traps for condensate collection.Flow rate of water can be controlled and measured using valve and Rotameter. Temperature of inlet and outlet of both hot & cold fluids are measured by temperature sensors.ExperimentsTo determine the overall heat transfer co-efficient for various degree of agitationTo make a comparative study of Heat Transfer through Jacket & Coil in an agitated vesselUtilities RequiredWater supply 20 lit/min (approx.) and Drain. Electricity Supply: 1 Phase, 220 V AC, 5.kW. Floor area of 1.5m x 1.5m